BandNR
TS 38.331
V18.5.1
2025-03
BandNR ::= SEQUENCE { bandNR FreqBandIndicatorNR, modifiedMPR-Behaviour BIT STRING (SIZE (8)) OPTIONAL, mimo-ParametersPerBand MIMO-ParametersPerBand OPTIONAL, extendedCP ENUMERATED {supported} OPTIONAL, multipleTCI ENUMERATED {supported} OPTIONAL, bwp-WithoutRestriction ENUMERATED {supported} OPTIONAL, bwp-SameNumerology ENUMERATED {upto2, upto4} OPTIONAL, bwp-DiffNumerology ENUMERATED {upto4} OPTIONAL, crossCarrierScheduling-SameSCS ENUMERATED {supported} OPTIONAL, pdsch-256QAM-FR2 ENUMERATED {supported} OPTIONAL, pusch-256QAM ENUMERATED {supported} OPTIONAL, ue-PowerClass ENUMERATED {pc1, pc2, pc3, pc4} OPTIONAL, rateMatchingLTE-CRS ENUMERATED {supported} OPTIONAL, channelBWs-DL CHOICE { fr1 SEQUENCE { scs-15kHz BIT STRING (SIZE (10)) OPTIONAL, scs-30kHz BIT STRING (SIZE (10)) OPTIONAL, scs-60kHz BIT STRING (SIZE (10)) OPTIONAL }, fr2 SEQUENCE { scs-60kHz BIT STRING (SIZE (3)) OPTIONAL, scs-120kHz BIT STRING (SIZE (3)) OPTIONAL } } OPTIONAL, channelBWs-UL CHOICE { fr1 SEQUENCE { scs-15kHz BIT STRING (SIZE (10)) OPTIONAL, scs-30kHz BIT STRING (SIZE (10)) OPTIONAL, scs-60kHz BIT STRING (SIZE (10)) OPTIONAL }, fr2 SEQUENCE { scs-60kHz BIT STRING (SIZE (3)) OPTIONAL, scs-120kHz BIT STRING (SIZE (3)) OPTIONAL } } OPTIONAL, ..., [[ maxUplinkDutyCycle-PC2-FR1 ENUMERATED {n60, n70, n80, n90, n100} OPTIONAL ]], [[ pucch-SpatialRelInfoMAC-CE ENUMERATED {supported} OPTIONAL, powerBoosting-pi2BPSK ENUMERATED {supported} OPTIONAL ]], [[ maxUplinkDutyCycle-FR2 ENUMERATED {n15, n20, n25, n30, n40, n50, n60, n70, n80, n90, n100} OPTIONAL ]], [[ channelBWs-DL-v1590 CHOICE { fr1 SEQUENCE { scs-15kHz BIT STRING (SIZE (16)) OPTIONAL, scs-30kHz BIT STRING (SIZE (16)) OPTIONAL, scs-60kHz BIT STRING (SIZE (16)) OPTIONAL }, fr2 SEQUENCE { scs-60kHz BIT STRING (SIZE (8)) OPTIONAL, scs-120kHz BIT STRING (SIZE (8)) OPTIONAL } } OPTIONAL, channelBWs-UL-v1590 CHOICE { fr1 SEQUENCE { scs-15kHz BIT STRING (SIZE (16)) OPTIONAL, scs-30kHz BIT STRING (SIZE (16)) OPTIONAL, scs-60kHz BIT STRING (SIZE (16)) OPTIONAL }, fr2 SEQUENCE { scs-60kHz BIT STRING (SIZE (8)) OPTIONAL, scs-120kHz BIT STRING (SIZE (8)) OPTIONAL } } OPTIONAL ]], [[ asymmetricBandwidthCombinationSet BIT STRING (SIZE (1..32)) OPTIONAL ]], [[ -- R1 10: NR-unlicensed sharedSpectrumChAccessParamsPerBand-r16 SharedSpectrumChAccessParamsPerBand-r16 OPTIONAL, -- R1 11-7b: Independent cancellation of the overlapping PUSCHs in an intra-band UL CA cancelOverlappingPUSCH-r16 ENUMERATED {supported} OPTIONAL, -- R1 14-1: Multiple LTE-CRS rate matching patterns multipleRateMatchingEUTRA-CRS-r16 SEQUENCE { maxNumberPatterns-r16 INTEGER (2..6), maxNumberNon-OverlapPatterns-r16 INTEGER (1..3) } OPTIONAL, -- R1 14-1a: Two LTE-CRS overlapping rate matching patterns within a part of NR carrier using 15 kHz overlapping with a LTE carrier overlapRateMatchingEUTRA-CRS-r16 ENUMERATED {supported} OPTIONAL, -- R1 14-2: PDSCH Type B mapping of length 9 and 10 OFDM symbols pdsch-MappingTypeB-Alt-r16 ENUMERATED {supported} OPTIONAL, -- R1 14-3: One slot periodic TRS configuration for FR1 oneSlotPeriodicTRS-r16 ENUMERATED {supported} OPTIONAL, olpc-SRS-Pos-r16 OLPC-SRS-Pos-r16 OPTIONAL, spatialRelationsSRS-Pos-r16 SpatialRelationsSRS-Pos-r16 OPTIONAL, simulSRS-MIMO-TransWithinBand-r16 ENUMERATED {n2} OPTIONAL, channelBW-DL-IAB-r16 CHOICE { fr1-100mhz SEQUENCE { scs-15kHz ENUMERATED {supported} OPTIONAL, scs-30kHz ENUMERATED {supported} OPTIONAL, scs-60kHz ENUMERATED {supported} OPTIONAL }, fr2-200mhz SEQUENCE { scs-60kHz ENUMERATED {supported} OPTIONAL, scs-120kHz ENUMERATED {supported} OPTIONAL } } OPTIONAL, channelBW-UL-IAB-r16 CHOICE { fr1-100mhz SEQUENCE { scs-15kHz ENUMERATED {supported} OPTIONAL, scs-30kHz ENUMERATED {supported} OPTIONAL, scs-60kHz ENUMERATED {supported} OPTIONAL }, fr2-200mhz SEQUENCE { scs-60kHz ENUMERATED {supported} OPTIONAL, scs-120kHz ENUMERATED {supported} OPTIONAL } } OPTIONAL, rasterShift7dot5-IAB-r16 ENUMERATED {supported} OPTIONAL, ue-PowerClass-v1610 ENUMERATED {pc1dot5} OPTIONAL, condHandover-r16 ENUMERATED {supported} OPTIONAL, condHandoverFailure-r16 ENUMERATED {supported} OPTIONAL, condHandoverTwoTriggerEvents-r16 ENUMERATED {supported} OPTIONAL, condPSCellChange-r16 ENUMERATED {supported} OPTIONAL, condPSCellChangeTwoTriggerEvents-r16 ENUMERATED {supported} OPTIONAL, mpr-PowerBoost-FR2-r16 ENUMERATED {supported} OPTIONAL, -- R1 11-9: Multiple active configured grant configurations for a BWP of a serving cell activeConfiguredGrant-r16 SEQUENCE { maxNumberConfigsPerBWP-r16 ENUMERATED {n1, n2, n4, n8, n12}, maxNumberConfigsAllCC-r16 INTEGER (2..32) } OPTIONAL, -- R1 11-9a: Joint release in a DCI for two or more configured grant Type 2 configurations for a given BWP of a serving cell jointReleaseConfiguredGrantType2-r16 ENUMERATED {supported} OPTIONAL, -- R1 12-2: Multiple SPS configurations sps-r16 SEQUENCE { maxNumberConfigsPerBWP-r16 INTEGER (1..8), maxNumberConfigsAllCC-r16 INTEGER (2..32) } OPTIONAL, -- R1 12-2a: Joint release in a DCI for two or more SPS configurations for a given BWP of a serving cell jointReleaseSPS-r16 ENUMERATED {supported} OPTIONAL, -- R1 13-19: Simultaneous positioning SRS and MIMO SRS transmission within a band across multiple CCs simulSRS-TransWithinBand-r16 ENUMERATED {n2} OPTIONAL, trs-AdditionalBandwidth-r16 ENUMERATED {trs-AddBW-Set1, trs-AddBW-Set2} OPTIONAL, handoverIntraF-IAB-r16 ENUMERATED {supported} OPTIONAL ]], [[ -- R1 22-5a: Simultaneous transmission of SRS for antenna switching and SRS for CB/NCB /BM for intra-band UL CA -- R1 22-5c: Simultaneous transmission of SRS for antenna switching and SRS for antenna switching for intra-band UL CA simulTX-SRS-AntSwitchingIntraBandUL-CA-r16 SimulSRS-ForAntennaSwitching-r16 OPTIONAL, -- R1 10: NR-unlicensed sharedSpectrumChAccessParamsPerBand-v1630 SharedSpectrumChAccessParamsPerBand-v1630 OPTIONAL ]], [[ handoverUTRA-FDD-r16 ENUMERATED {supported} OPTIONAL, -- R4 7-4: Report the shorter transient capability supported by the UE: 2, 4 or 7us enhancedUL-TransientPeriod-r16 ENUMERATED {us2, us4, us7} OPTIONAL, sharedSpectrumChAccessParamsPerBand-v1640 SharedSpectrumChAccessParamsPerBand-v1640 OPTIONAL ]], [[ type1-PUSCH-RepetitionMultiSlots-v1650 ENUMERATED {supported} OPTIONAL, type2-PUSCH-RepetitionMultiSlots-v1650 ENUMERATED {supported} OPTIONAL, pusch-RepetitionMultiSlots-v1650 ENUMERATED {supported} OPTIONAL, configuredUL-GrantType1-v1650 ENUMERATED {supported} OPTIONAL, configuredUL-GrantType2-v1650 ENUMERATED {supported} OPTIONAL, sharedSpectrumChAccessParamsPerBand-v1650 SharedSpectrumChAccessParamsPerBand-v1650 OPTIONAL ]], [[ enhancedSkipUplinkTxConfigured-v1660 ENUMERATED {supported} OPTIONAL, enhancedSkipUplinkTxDynamic-v1660 ENUMERATED {supported} OPTIONAL ]], [[ maxUplinkDutyCycle-PC1dot5-MPE-FR1-r16 ENUMERATED {n10, n15, n20, n25, n30, n40, n50, n60, n70, n80, n90, n100} OPTIONAL, txDiversity-r16 ENUMERATED {supported} OPTIONAL ]], [[ -- R1 36-1: Support of 1024QAM for PDSCH for FR1 pdsch-1024QAM-FR1-r17 ENUMERATED {supported} OPTIONAL, -- R4 22-1 support of FR2 HST operation ue-PowerClass-v1700 ENUMERATED {pc5, pc6, pc7} OPTIONAL, -- R1 24: NR extension to 71GHz (FR2-2) fr2-2-AccessParamsPerBand-r17 FR2-2-AccessParamsPerBand-r17 OPTIONAL, rlm-Relaxation-r17 ENUMERATED {supported} OPTIONAL, bfd-Relaxation-r17 ENUMERATED {supported} OPTIONAL, cg-SDT-r17 ENUMERATED {supported} OPTIONAL, locationBasedCondHandover-r17 ENUMERATED {supported} OPTIONAL, timeBasedCondHandover-r17 ENUMERATED {supported} OPTIONAL, eventA4BasedCondHandover-r17 ENUMERATED {supported} OPTIONAL, mn-InitiatedCondPSCellChangeNRDC-r17 ENUMERATED {supported} OPTIONAL, sn-InitiatedCondPSCellChangeNRDC-r17 ENUMERATED {supported} OPTIONAL, -- R1 29-3a: PDCCH skipping pdcch-SkippingWithoutSSSG-r17 ENUMERATED {supported} OPTIONAL, -- R1 29-3b: 2 search space sets group switching sssg-Switching-1BitInd-r17 ENUMERATED {supported} OPTIONAL, -- R1 29-3c: 3 search space sets group switching sssg-Switching-2BitInd-r17 ENUMERATED {supported} OPTIONAL, -- R1 29-3d: 2 search space sets group switching with PDCCH skipping pdcch-SkippingWithSSSG-r17 ENUMERATED {supported} OPTIONAL, -- R1 29-3e: Support Search space set group switching capability 2 for FR1 searchSpaceSetGrp-switchCap2-r17 ENUMERATED {supported} OPTIONAL, -- R1 26-1: Uplink Time and Frequency pre-compensation and timing relationship enhancements uplinkPreCompensation-r17 ENUMERATED {supported} OPTIONAL, -- R1 26-4: UE reporting of information related to TA pre-compensation uplink-TA-Reporting-r17 ENUMERATED {supported} OPTIONAL, -- R1 26-5: Increasing the number of HARQ processes max-HARQ-ProcessNumber-r17 ENUMERATED {u16d32, u32d16, u32d32} OPTIONAL, -- R1 26-6: Type-2 HARQ codebook enhancement type2-HARQ-Codebook-r17 ENUMERATED {supported} OPTIONAL, -- R1 26-6a: Type-1 HARQ codebook enhancement type1-HARQ-Codebook-r17 ENUMERATED {supported} OPTIONAL, -- R1 26-6b: Type-3 HARQ codebook enhancement type3-HARQ-Codebook-r17 ENUMERATED {supported} OPTIONAL, -- R1 26-9: UE-specific K_offset ue-specific-K-Offset-r17 ENUMERATED {supported} OPTIONAL, -- R1 24-1f: Multiple PDSCH scheduling by single DCI for 120kHz in FR2-1 multiPDSCH-SingleDCI-FR2-1-SCS-120kHz-r17 ENUMERATED {supported} OPTIONAL, -- R1 24-1g: Multiple PUSCH scheduling by single DCI for 120kHz in FR2-1 multiPUSCH-SingleDCI-FR2-1-SCS-120kHz-r17 ENUMERATED {supported} OPTIONAL, -- R4 14-4: Parallel PRS measurements in RRC_INACTIVE state, FR1/FR2 diff parallelPRS-MeasRRC-Inactive-r17 ENUMERATED {supported} OPTIONAL, -- R1 27-1-2: Support of UE-TxTEGs for UL TDOA nr-UE-TxTEG-ID-MaxSupport-r17 ENUMERATED {n1, n2, n3, n4, n6, n8} OPTIONAL, -- R1 27-17: PRS processing in RRC_INACTIVE prs-ProcessingRRC-Inactive-r17 ENUMERATED {supported} OPTIONAL, -- R1 27-3-2: DL PRS measurement outside MG and in a PRS processing window prs-ProcessingWindowType1A-r17 ENUMERATED {option1, option2, option3} OPTIONAL, prs-ProcessingWindowType1B-r17 ENUMERATED {option1, option2, option3} OPTIONAL, prs-ProcessingWindowType2-r17 ENUMERATED {option1, option2, option3} OPTIONAL, -- R1 27-15: Positioning SRS transmission in RRC_INACTIVE state for initial UL BWP srs-AllPosResourcesRRC-Inactive-r17 SRS-AllPosResourcesRRC-Inactive-r17 OPTIONAL, -- R1 27-16: OLPC for positioning SRS in RRC_INACTIVE state - gNB olpc-SRS-PosRRC-Inactive-r17 OLPC-SRS-Pos-r16 OPTIONAL, -- R1 27-19: Spatial relation for positioning SRS in RRC_INACTIVE state - gNB spatialRelationsSRS-PosRRC-Inactive-r17 SpatialRelationsSRS-Pos-r16 OPTIONAL, -- R1 30-1: Increased maximum number of PUSCH Type A repetitions maxNumberPUSCH-TypeA-Repetition-r17 ENUMERATED {supported} OPTIONAL, -- R1 30-2: PUSCH Type A repetitions based on available slots puschTypeA-RepetitionsAvailSlot-r17 ENUMERATED {supported} OPTIONAL, -- R1 30-3: TB processing over multi-slot PUSCH tb-ProcessingMultiSlotPUSCH-r17 ENUMERATED {supported} OPTIONAL, -- R1 30-3a: Repetition of TB processing over multi-slot PUSCH tb-ProcessingRepMultiSlotPUSCH-r17 ENUMERATED {supported} OPTIONAL, -- R1 30-4: The maximum duration for DM-RS bundling maxDurationDMRS-Bundling-r17 SEQUENCE { fdd-r17 ENUMERATED {n4, n8, n16, n32} OPTIONAL, tdd-r17 ENUMERATED {n2, n4, n8, n16} OPTIONAL } OPTIONAL, -- R1 30-6: Repetition of PUSCH transmission scheduled by RAR UL grant and DCI format 0_0 with CRC scrambled by TC-RNTI pusch-RepetitionMsg3-r17 ENUMERATED {supported} OPTIONAL, sharedSpectrumChAccessParamsPerBand-v1710 SharedSpectrumChAccessParamsPerBand-v1710 OPTIONAL, -- R4 25-2: Parallel measurements on cells belonging to a different NGSO satellite than a serving satellite without scheduling restrictions -- on normal operations with the serving cell parallelMeasurementWithoutRestriction-r17 ENUMERATED {supported} OPTIONAL, -- R4 25-5: Parallel measurements on multiple NGSO satellites within a SMTC maxNumber-NGSO-SatellitesWithinOneSMTC-r17 ENUMERATED {n1, n2, n3, n4} OPTIONAL, -- R1 26-10: K1 range extension k1-RangeExtension-r17 ENUMERATED {supported} OPTIONAL, -- R1 35-1: Aperiodic CSI-RS for tracking for fast SCell activation aperiodicCSI-RS-FastScellActivation-r17 SEQUENCE { maxNumberAperiodicCSI-RS-PerCC-r17 ENUMERATED {n8, n16, n32, n48, n64, n128, n255}, maxNumberAperiodicCSI-RS-AcrossCCs-r17 ENUMERATED {n8, n16, n32, n64, n128, n256, n512, n1024} } OPTIONAL, -- R1 35-2: Aperiodic CSI-RS bandwidth for tracking for fast SCell activation for 10MHz UE channel bandwidth aperiodicCSI-RS-AdditionalBandwidth-r17 ENUMERATED {addBW-Set1, addBW-Set2} OPTIONAL, -- R1 28-1a: RRC-configured DL BWP without CD-SSB or NCD-SSB bwp-WithoutCD-SSB-OrNCD-SSB-RedCap-r17 ENUMERATED {supported} OPTIONAL, -- R1 28-3: Half-duplex FDD operation type A for (e)RedCap UE halfDuplexFDD-TypeA-RedCap-r17 ENUMERATED {supported} OPTIONAL, -- R1 27-15b: Positioning SRS transmission in RRC_INACTIVE state configured outside initial UL BWP posSRS-RRC-Inactive-OutsideInitialUL-BWP-r17 PosSRS-RRC-Inactive-OutsideInitialUL-BWP-r17 OPTIONAL, -- R4 15-3 UE support of CBW for 480kHz SCS channelBWs-DL-SCS-480kHz-FR2-2-r17 BIT STRING (SIZE (8)) OPTIONAL, channelBWs-UL-SCS-480kHz-FR2-2-r17 BIT STRING (SIZE (8)) OPTIONAL, -- R4 15-4 UE support of CBW for 960kHz SCS channelBWs-DL-SCS-960kHz-FR2-2-r17 BIT STRING (SIZE (8)) OPTIONAL, channelBWs-UL-SCS-960kHz-FR2-2-r17 BIT STRING (SIZE (8)) OPTIONAL, -- R4 17-1 UL gap for Tx power management ul-GapFR2-r17 ENUMERATED {supported} OPTIONAL, -- R1 25-4: One-shot HARQ ACK feedback triggered by DCI format 1_2 oneShotHARQ-feedbackTriggeredByDCI-1-2-r17 ENUMERATED {supported} OPTIONAL, -- R1 25-5: PHY priority handling for one-shot HARQ ACK feedback oneShotHARQ-feedbackPhy-Priority-r17 ENUMERATED {supported} OPTIONAL, -- R1 25-6: Enhanced type 3 HARQ-ACK codebook feedback enhancedType3-HARQ-CodebookFeedback-r17 SEQUENCE { enhancedType3-HARQ-Codebooks-r17 ENUMERATED {n1, n2, n4, n8}, maxNumberPUCCH-Transmissions-r17 ENUMERATED {n1, n2, n3, n4, n5, n6, n7} } OPTIONAL, -- R1 25-7: Triggered HARQ-ACK codebook re-transmission triggeredHARQ-CodebookRetx-r17 SEQUENCE { minHARQ-Retx-Offset-r17 ENUMERATED {n-7, n-5, n-3, n-1, n1}, maxHARQ-Retx-Offset-r17 ENUMERATED {n4, n6, n8, n10, n12, n14, n16, n18, n20, n22, n24} } OPTIONAL ]], [[ -- R4 22-2 support of one shot large UL timing adjustment ue-OneShotUL-TimingAdj-r17 ENUMERATED {supported} OPTIONAL, -- R1 25-2: Repetitions for PUCCH format 0, and 2 over multiple slots with K = 2, 4, 8 pucch-Repetition-F0-2-r17 ENUMERATED {supported} OPTIONAL, -- R1 25-11a: 4-bits subband CQI for NTN and unlicensed cqi-4-BitsSubbandNTN-SharedSpectrumChAccess-r17 ENUMERATED {supported} OPTIONAL, -- R1 25-16: HARQ-ACK with different priorities multiplexing on a PUCCH/PUSCH mux-HARQ-ACK-DiffPriorities-r17 ENUMERATED {supported} OPTIONAL, -- R1 25-20a: Propagation delay compensation based on Rel-15 TA procedure for NTN and unlicensed ta-BasedPDC-NTN-SharedSpectrumChAccess-r17 ENUMERATED {supported} OPTIONAL, -- R1 33-2b: DCI-based enabling/disabling ACK/NACK-based feedback for dynamic scheduling for multicast ack-NACK-FeedbackForMulticastWithDCI-Enabler-r17 ENUMERATED {supported} OPTIONAL, -- R1 33-2e: Multiple G-RNTIs for group-common PDSCHs maxNumberG-RNTI-r17 INTEGER (2..8) OPTIONAL, -- R1 33-2f: Dynamic multicast with DCI format 4_2 dynamicMulticastDCI-Format4-2-r17 ENUMERATED {supported} OPTIONAL, -- R1 33-2i: Supported maximal modulation order for multicast PDSCH maxModulationOrderForMulticast-r17 CHOICE { fr1-r17 ENUMERATED {qam256, qam1024}, fr2-r17 ENUMERATED {qam64, qam256} } OPTIONAL, -- R1 33-3-1: Dynamic Slot-level repetition for group-common PDSCH for TN and licensed dynamicSlotRepetitionMulticastTN-NonSharedSpectrumChAccess-r17 ENUMERATED {n8, n16} OPTIONAL, -- R1 33-3-1a: Dynamic Slot-level repetition for group-common PDSCH for NTN and unlicensed dynamicSlotRepetitionMulticastNTN-SharedSpectrumChAccess-r17 ENUMERATED {n8, n16} OPTIONAL, -- R1 33-4-1: DCI-based enabling/disabling NACK-only based feedback for dynamic scheduling for multicast nack-OnlyFeedbackForMulticastWithDCI-Enabler-r17 ENUMERATED {supported} OPTIONAL, -- R1 33-5-1b: DCI-based enabling/disabling ACK/NACK-based feedback for dynamic scheduling for multicast ack-NACK-FeedbackForSPS-MulticastWithDCI-Enabler-r17 ENUMERATED {supported} OPTIONAL, -- R1 33-5-1h: Multiple G-CS-RNTIs for SPS group-common PDSCHs maxNumberG-CS-RNTI-r17 INTEGER (2..8) OPTIONAL, -- R1 33-10: Support group-common PDSCH RE-level rate matching for multicast re-LevelRateMatchingForMulticast-r17 ENUMERATED {supported} OPTIONAL, -- R1 36-1a: Support of 1024QAM for PDSCH with maximum 2 MIMO layers for FR1 pdsch-1024QAM-2MIMO-FR1-r17 ENUMERATED {supported} OPTIONAL, -- R4 14-3 PRS measurement without MG prs-MeasurementWithoutMG-r17 ENUMERATED {cpLength, quarterSymbol, halfSymbol, halfSlot} OPTIONAL, -- R4 25-7: The number of target NGSO satellites the UE can monitor per carrier maxNumber-NGSO-SatellitesPerCarrier-r17 INTEGER (3..4) OPTIONAL, -- R1 27-3-3 DL PRS Processing Capability outside MG - buffering capability prs-ProcessingCapabilityOutsideMGinPPW-r17 SEQUENCE (SIZE(1..3)) OF PRS-ProcessingCapabilityOutsideMGinPPWperType-r17 OPTIONAL, -- R1 27-15a: Positioning SRS transmission in RRC_INACTIVE state for initial UL BWP with semi-persistent SRS srs-SemiPersistent-PosResourcesRRC-Inactive-r17 SEQUENCE { maxNumOfSemiPersistentSRSposResources-r17 ENUMERATED {n1, n2, n4, n8, n16, n32, n64}, maxNumOfSemiPersistentSRSposResourcesPerSlot-r17 ENUMERATED {n1, n2, n3, n4, n5, n6, n8, n10, n12, n14} } OPTIONAL, -- R2: UE support of CBW for 120kHz SCS channelBWs-DL-SCS-120kHz-FR2-2-r17 BIT STRING (SIZE (8)) OPTIONAL, channelBWs-UL-SCS-120kHz-FR2-2-r17 BIT STRING (SIZE (8)) OPTIONAL ]], [[ -- R1 30-4a: DM-RS bundling for PUSCH repetition type A dmrs-BundlingPUSCH-RepTypeA-r17 ENUMERATED {supported} OPTIONAL, -- R1 30-4b: DM-RS bundling for PUSCH repetition type B dmrs-BundlingPUSCH-RepTypeB-r17 ENUMERATED {supported} OPTIONAL, -- R1 30-4c: DM-RS bundling for TB processing over multi-slot PUSCH dmrs-BundlingPUSCH-multiSlot-r17 ENUMERATED {supported} OPTIONAL, -- R1 30-4d: DMRS bundling for PUCCH repetitions dmrs-BundlingPUCCH-Rep-r17 ENUMERATED {supported} OPTIONAL, -- R1 30-4e: Enhanced inter-slot frequency hopping with inter-slot bundling for PUSCH interSlotFreqHopInterSlotBundlingPUSCH-r17 ENUMERATED {supported} OPTIONAL, -- R1 30-4f: Enhanced inter-slot frequency hopping for PUCCH repetitions with DMRS bundling interSlotFreqHopPUCCH-r17 ENUMERATED {supported} OPTIONAL, -- R1 30-4g: Restart DM-RS bundling dmrs-BundlingRestart-r17 ENUMERATED {supported} OPTIONAL, -- R1 30-4h: DM-RS bundling for non-back-to-back transmission dmrs-BundlingNonBackToBackTX-r17 ENUMERATED {supported} OPTIONAL ]], [[ -- R1 33-5-1e: Dynamic Slot-level repetition for SPS group-common PDSCH for multicast maxDynamicSlotRepetitionForSPS-Multicast-r17 ENUMERATED {n8, n16} OPTIONAL, -- R1 33-5-1g: DCI-based enabling/disabling NACK-only based feedback for SPS group-common PDSCH for multicast nack-OnlyFeedbackForSPS-MulticastWithDCI-Enabler-r17 ENUMERATED {supported} OPTIONAL, -- R1 33-5-1i: Multicast SPS scheduling with DCI format 4_2 sps-MulticastDCI-Format4-2-r17 ENUMERATED {supported} OPTIONAL, -- R1 33-5-2: Multiple SPS group-common PDSCH configuration on PCell sps-MulticastMultiConfig-r17 INTEGER (1..8) OPTIONAL, -- R1 33-6-1: DL priority indication for multicast in DCI priorityIndicatorInDCI-Multicast-r17 ENUMERATED {supported} OPTIONAL, -- R1 33-6-1a: DL priority configuration for SPS multicast priorityIndicatorInDCI-SPS-Multicast-r17 ENUMERATED {supported} OPTIONAL, -- R1 33-6-2: Two HARQ-ACK codebooks simultaneously constructed for supporting HARQ-ACK codebooks with different priorities -- for unicast and multicast at a UE twoHARQ-ACK-CodebookForUnicastAndMulticast-r17 ENUMERATED {supported} OPTIONAL, -- R1 33-6-3: More than one PUCCH for HARQ-ACK transmission for multicast or for unicast and multicast within a slot multiPUCCH-HARQ-ACK-ForMulticastUnicast-r17 ENUMERATED {supported} OPTIONAL, -- R1 33-9: Supporting unicast PDCCH to release SPS group-common PDSCH releaseSPS-MulticastWithCS-RNTI-r17 ENUMERATED {supported} OPTIONAL ]], [[ -- R1 41-3-1a UE automomous TA adjustment when cell-reselection happens posUE-TA-AutoAdjustment-r18 ENUMERATED {supported} OPTIONAL, -- R1 41-3-1: SRS for positioning configuration in multiple cells for UEs in RRC_INACTIVE state for initial UL BWP posSRS-ValidityAreaRRC-InactiveInitialUL-BWP-r18 ENUMERATED {supported} OPTIONAL, -- R1 41-3-2: SRS for positioning configuration in multiple cells for UEs in RRC_INACTIVE state for configured outside -- initial UL BWP posSRS-ValidityAreaRRC-InactiveOutsideInitialUL-BWP-r18 ENUMERATED {supported} OPTIONAL, -- R1 41-5-1:PRS measurement with Rx frequency hopping within a MG and measurement reporting RRC_CONNECTED for RedCap UEs dl-PRS-MeasurementWithRxFH-RRC-ConnectedForRedCap-r18 DL-PRS-MeasurementWithRxFH-RRC-Connected-r18 OPTIONAL, -- R1 41-5-2: Support of positioning SRS with Tx frequency hopping in RRC_CONNECTED for RedCap UEs posSRS-TxFH-RRC-ConnectedForRedCap-r18 PosSRS-TxFrequencyHoppingRRC-Connected-r18 OPTIONAL, -- R1 41-5-2a: Support of positioning SRS with Tx frequency hopping in RRC_INACTIVE for RedCap UEs posSRS-TxFH-RRC-InactiveForRedCap-r18 PosSRS-TxFrequencyHoppingRRC-Inactive-r18 OPTIONAL, -- R1 41-4-8: Support of Positioning SRS bandwidth aggregation in RRC_INACTIVE posSRS-BWA-RRC-Inactive-r18 PosSRS-BWA-RRC-Inactive-r18 OPTIONAL, -- R1 41-4-6a support a Rel-17 single DCI scheduling positioning SRS resource sets across the linked carriers -- for SRS bandwidth aggregation in RRC_CONNECTED state posJointTriggerBySingleDCI-RRC-Connected-r18 ENUMERATED {supported} OPTIONAL, -- R1 41-5-1a PRS measurement with Rx frequency hopping in RRC_INACTIVE for RedCap UEs dl-PRS-MeasurementWithRxFH-RRC-InactiveforRedCap-r18 ENUMERATED {supported} OPTIONAL, -- R1 41-5-1b PRS measurement with Rx frequency hopping in RRC_IDLE for RedCap UEs dl-PRS-MeasurementWithRxFH-RRC-IdleforRedCap-r18 ENUMERATED {supported} OPTIONAL, -- R1 42-1: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for periodic CSI reporting spatialAdaptation-CSI-Feedback-r18 SEQUENCE { csiFeedbackType-r18 ENUMERATED {sdType1, sdType2, both}, maxNumberLmax-r18 INTEGER (2..4), maxNumberCSI-ResourcePerCC-r18 SEQUENCE { sdType1-Resource-r18 INTEGER (1..32), sdType2-Resource-r18 INTEGER (1..32) }, maxNumberTotalCSI-ResourcePerCC-r18 SEQUENCE { sdType1-Resource-r18 ENUMERATED {n8, n16, n24, n32, n64, n128}, sdType2-Resource-r18 ENUMERATED {n8, n16, n24, n32, n64, n128} }, totalNumberCSI-Reporting-r18 INTEGER (2..4) } OPTIONAL, -- R1 42-1a: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for periodic CSI -- reporting on PUSCH spatialAdaptation-CSI-FeedbackPUSCH-r18 SEQUENCE { csiFeedbackType-r18 ENUMERATED {sdType1, sdType2, both}, maxNumberLmax-r18 INTEGER (2..8), subReportCSI-r18 INTEGER (2..4), maxNumberCSI-ResourcePerCC-r18 INTEGER (1..32), maxNumberTotalCSI-ResourcePerCC-r18 ENUMERATED {n8, n16, n24, n32, n64, n128}, totalNumberCSI-Reporting-r18 INTEGER (2..12) } OPTIONAL, -- R1 42-1b: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for aperiodic CSI reporting spatialAdaptation-CSI-FeedbackAperiodic-r18 SEQUENCE { csiFeedbackType-r18 ENUMERATED {sdType1, sdType2, both}, maxNumberLmax-r18 INTEGER (2..8), subReportCSI-r18 INTEGER (2..4), maxNumberCSI-ResourcePerCC-r18 SEQUENCE { sdType1-Resource-r18 INTEGER (1..32), sdType2-Resource-r18 INTEGER (1..32) }, maxNumberTotalCSI-ResourcePerCC-r18 SEQUENCE { sdType1-Resource-r18 ENUMERATED {n8, n16, n24, n32, n64, n128}, sdType2-Resource-r18 ENUMERATED {n8, n16, n24, n32, n64, n128} }, totalNumberCSI-Reporting-r18 INTEGER (2..12) } OPTIONAL, -- R1 42-1c: Spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s) for semi-persistent -- CSI reporting on PUCCH spatialAdaptation-CSI-FeedbackPUCCH-r18 SEQUENCE { csiFeedbackType-r18 ENUMERATED {sdType1, sdType2, both}, maxNumberLmax-r18 INTEGER (2..4), subReportCSI-r18 INTEGER (2..4), maxNumberCSI-ResourcePerCC-r18 INTEGER (1..32), maxNumberTotalCSI-ResourcePerCC-r18 ENUMERATED {n8, n16, n24, n32, n64, n128}, totalNumberCSI-Reporting-r18 INTEGER (2..4) } OPTIONAL, -- R1 42-2: Power domain adaptation with CSI feedback based on CSI report sub-configuration(s) for periodic CSI reporting powerAdaptation-CSI-Feedback-r18 SEQUENCE { maxNumberLmax-r18 INTEGER (2..4), maxNumberCSI-ResourcePerCC-r18 INTEGER (1..32), maxNumberTotalCSI-ResourcePerCC-r18 ENUMERATED {n8, n16, n24, n32, n64, n128}, totalNumberCSI-Reporting-r18 INTEGER (2..4) } OPTIONAL, -- R1 42-2a: Power domain adaptation with CSI feedback based on CSI report sub-configuration(s) for semi-persistent CSI -- reporting on PUSCH powerAdaptation-CSI-FeedbackPUSCH-r18 SEQUENCE { maxNumberLmax-r18 INTEGER (2..8), subReportCSI-r18 INTEGER (2..4), maxNumberCSI-ResourcePerCC-r18 INTEGER (1..32), maxNumberTotalCSI-ResourcePerCC-r18 ENUMERATED {n8, n16, n24, n32, n64, n128}, totalNumberCSI-Reporting-r18 INTEGER (2..12) } OPTIONAL, -- R1 42-2b: Power domain adaptation with CSI feedback based on CSI report sub-configuration(s) for aperiodic CSI reporting powerAdaptation-CSI-FeedbackAperiodic-r18 SEQUENCE { maxNumberLmax-r18 INTEGER (2..8), subReportCSI-r18 INTEGER (2..4), maxNumberCSI-ResourcePerCC-r18 INTEGER (1..32), maxNumberTotalCSI-ResourcePerCC-r18 ENUMERATED {n8, n16, n24, n32, n64, n128}, totalNumberCSI-Reporting-r18 INTEGER (2..12) } OPTIONAL, -- R1 42-2c: Power domain adaptation with CSI feedback based on CSI report sub-configuration(s) for semi-persistent CSI -- reporting on PUCCH powerAdaptation-CSI-FeedbackPUCCH-r18 SEQUENCE { maxNumberLmax-r18 INTEGER (2..4), subReportCSI-r18 INTEGER (2..4), maxNumberCSI-ResourcePerCC-r18 INTEGER (1..32), maxNumberTotalCSI-ResourcePerCC-r18 ENUMERATED {n8, n16, n24, n32, n64, n128}, totalNumberCSI-Reporting-r18 INTEGER (2..4) } OPTIONAL, -- R1 42-4: Cell DTX and/or DRX operation based on RRC configuration nes-CellDTX-DRX-r18 ENUMERATED {cellDTXonly, cellDRXonly, both} OPTIONAL, -- R1 42-5: Cell DTX/DRX operation triggered by DCI format 2_9 nes-CellDTX-DRX-DCI2-9-r18 ENUMERATED {supported} OPTIONAL, -- R1 42-7: Mixed codebook combination for spatial domain adaptation with CSI feedback based on CSI report sub-configuration(s), -- each containing one port subset configuration mixCodeBookSpatialAdaptation-r18 ENUMERATED {supported} OPTIONAL, -- R1 42-8: the number of CSI report(s) for which the UE can measure and process reference signals simultaneously in a CC of the -- band for which this capability is provided. simultaneousCSI-SubReportsPerCC-r18 INTEGER (1..8) OPTIONAL, -- R1 44-2: NTN DMRS bundling enhancement for PUSCH in NGSO scenarios ntn-DMRS-BundlingNGSO-r18 ENUMERATED {n4, n8, n16, n32} OPTIONAL, -- R1 45-3: Beam indication with joint DL/UL LTM TCI states ltm-BeamIndicationJointTCI-r18 SEQUENCE { maxNumberJointTCI-PerCell-r18 ENUMERATED {n8,n12,n16,n24,n32,n48,n64,n128}, qcl-Resource-r18 ENUMERATED {ssb, trs, both}, maxNumberJointTCI-AcrossCells-r18 INTEGER (1..128), maxNumberCells-r18 INTEGER (1..8) } OPTIONAL, dummy-ltm-MAC-CE-JointTCI-r18 SEQUENCE { qcl-Resource-r18 ENUMERATED {ssb, trs, both}, maxNumberJointTCI-PerCell-r18 INTEGER (1..16), maxNumberJointTCI-AcrossCells-r18 ENUMERATED {n1,n2,n3,n4,n8,n16,n32} } OPTIONAL, -- R1 45-4: Beam indication with separate DL/UL LTM TCI states ltm-BeamIndicationSeparateTCI-r18 SEQUENCE { maxNumberDL-TCI-PerCell-r18 ENUMERATED {n4,n8,n12,n16,n24,n32,n48,n64,n128}, maxNumberUL-TCI-PerCell-r18 ENUMERATED {n4,n8,n12,n16,n24,n32,n48,n64}, qcl-Resource-r18 ENUMERATED {ssb, trs, both}, maxNumberDL-TCI-AcrossCells-r18 INTEGER (1..128), maxNumberUL-TCI-AcrossCells-r18 INTEGER (1..64), maxNumberCells-r18 INTEGER (1..8) } OPTIONAL, dummy-ltm-MAC-CE-SeparateTCI-r18 SEQUENCE { qcl-Resource-r18 ENUMERATED {ssb, trs, both}, maxNumberDL-TCI-PerCell-r18 INTEGER (1..8), maxNumberUL-TCI-PerCell-r18 INTEGER (1..8), maxNumberDL-TCI-AcrossCells-r18 ENUMERATED {n1,n2,n4,n8,n16}, maxNumberUL-TCI-AcrossCells-r18 ENUMERATED {n1,n2,n4,n8,n16} } OPTIONAL, -- R1 45-5: RACH-based early TA acquisition rach-EarlyTA-Measurement-r18 INTEGER (1..8) OPTIONAL, -- R1 45-6: UE-based TA measurement ue-TA-Measurement-r18 INTEGER (1..8) OPTIONAL, -- R1 45-7: TA indication in cell switch command ta-IndicationCellSwitch-r18 ENUMERATED {supported} OPTIONAL, -- R1 49-8: Triggered HARQ-ACK codebook re-transmission for DCI format 1_3 triggeredHARQ-CodebookRetxDCI-1-3-r18 SEQUENCE { minHARQ-Retx-Offset-r18 ENUMERATED {n-7, n-5, n-3, n-1, n1}, maxHARQ-Retx-Offset-r18 ENUMERATED {n4, n6, n8, n10, n12, n14, n16, n18, n20, n22, n24} } OPTIONAL, -- R1 49-12: Unified TCI with joint DL/UL TCI update by DCI format 1_3 for intra-cell and inter-cell beam management with more than -- one MAC-CE activated joint TCI state per CC unifiedJointTCI-MultiMAC-CE-DCI-1-3-r18 SEQUENCE { minBeamApplicationTime-r18 CHOICE { fr1-r18 SEQUENCE { scs-15kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70} OPTIONAL, scs-30kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70} OPTIONAL, scs-60kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70} OPTIONAL }, fr2-r18 SEQUENCE { scs-60kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70, sym84, sym98, sym112, sym224, sym336} OPTIONAL, scs-120kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70, sym84, sym98, sym112, sym224, sym336} OPTIONAL } }, maxActivatedTCI-PerCC-r18 INTEGER (2..8) OPTIONAL } OPTIONAL, -- R1 49-12a: Unified TCI with separate DL/UL TCI update by DCI format 1_3 for intra-cell beam management with more than -- one MAC-CE activated separate TCI state per CC unifiedSeparateTCI-MultiMAC-CE-IntraCell-r18 SEQUENCE { minBeamApplicationTime-r18 CHOICE { fr1-r18 SEQUENCE { scs-15kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70, sym84, sym98, sym112, sym224, sym336} OPTIONAL, scs-30kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70, sym84, sym98, sym112, sym224, sym336} OPTIONAL, scs-60kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70, sym84, sym98, sym112, sym224, sym336} OPTIONAL }, fr2-r18 SEQUENCE { scs-60kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70, sym84, sym98, sym112, sym224, sym336} OPTIONAL, scs-120kHz-r18 ENUMERATED {sym1, sym2, sym4, sym7, sym14, sym28, sym42, sym56, sym70, sym84, sym98, sym112, sym224, sym336} OPTIONAL } }, maxActivatedDL-TCI-PerCC-r18 INTEGER (2..8) OPTIONAL, maxActivatedUL-TCI-PerCC-r18 INTEGER (2..8) OPTIONAL } OPTIONAL, -- R1 50-1: Multi-PUSCHs for Configured Grant multiPUSCH-CG-r18 ENUMERATED {n16, n32} OPTIONAL, -- R1 50-1a: Multiple active multi-PUSCHs configured grant configurations for a BWP of a serving cell multiPUSCH-ActiveConfiguredGrant-r18 SEQUENCE { maxNumberConfigsPerBWP ENUMERATED {n1, n2, n4, n8, n12}, maxNumberConfigsAllCC-FR1 INTEGER (2..32), maxNumberConfigsAllCC-FR2 INTEGER (2..32) } OPTIONAL, -- R1 50-1b: Joint release in a DCI for two or more configured grant Type 2 configurations, including multi-PUSCH CG -- configuration(s), for a given BWP of a serving cell jointReleaseDCI-r18 ENUMERATED {supported} OPTIONAL, -- R1 50-2: UCI indication of unused CG-PUSCH transmission occasions cg-PUSCH-UTO-UCI-Ind-r18 ENUMERATED {supported} OPTIONAL, -- R1 50-3: PDCCH monitoring resumption after UL NACK pdcch-MonitoringResumptionAfterUL-NACK-r18 ENUMERATED {supported} OPTIONAL, -- R1 51-1: Support for 3 MHz symmetric channel bandwidth in DL and UL support3MHz-ChannelBW-Symmetric-r18 ENUMERATED {supported} OPTIONAL, -- R1 51-1a: Support for 3 MHz channel bandwidth in uplink with larger than 3 MHz channel BW in DL support3MHz-ChannelBW-Asymmetric-r18 ENUMERATED {supported} OPTIONAL, -- R1 51-2a: support 12 PRB CORESET0 support12PRB-CORESET0-r18 ENUMERATED {supported} OPTIONAL, -- R1 52-1: Reception of NR PDCCH candidates overlapping with LTE CRS REs nr-PDCCH-OverlapLTE-CRS-RE-r18 SEQUENCE { overlapInRE-r18 ENUMERATED {oneSymbolNoOverlap, someOrAllSymOverlap}, overlapInSymbol-r18 ENUMERATED {symbol2,symbol1And2} } OPTIONAL, -- Editor's Note: someOrAllSymOverlap considers to be supported in overlapInRE-r18 only if RAN4 performance requirements for -- someOrAllSymOverlap are not defined -- R1 52-1a: Reception of NR PDCCH candidates overlapping with LTE CRS REs with multiple non-overlapping CRS rate matching patterns nr-PDCCH-OverlapLTE-CRS-RE-MultiPatterns-r18 ENUMERATED {supported} OPTIONAL, -- R1 52-1b: NR PDCCH reception that overlaps with LTE CRS within a single span of 3 consecutive OFDM symbols that is within the -- first 4 OFDM symbols in a slot nr-PDCCH-OverlapLTE-CRS-RE-Span-3-4-r18 ENUMERATED {supported} OPTIONAL, -- R1 52-2: Two LTE-CRS overlapping rate matching patterns within NR 15 kHz carrier overlapping with LTE carrier (regardless of -- support or configuration of multi-TRP) twoRateMatchingEUTRA-CRS-patterns-3-4-r18 SEQUENCE { maxNumberPatterns-r18 INTEGER (2..6), maxNumberNon-OverlapPatterns-r18 INTEGER (1..3) } OPTIONAL, -- R1 52-2a: Two LTE-CRS overlapping rate matching patterns with two different values of coresetPoolIndex within NR 15 kHz carrier -- overlapping with LTE carrier overlapRateMatchingEUTRA-CRS-Patterns-3-4-Diff-CS-Pool-r18 ENUMERATED {supported} OPTIONAL, -- R1 53-3: Support RLM/BM/BFD measurements based on NCD-SSB within active BWP ncd-SSB-BWP-Wor-r18 ENUMERATED {supported} OPTIONAL, -- R1 53-4: Support Support RLM/BM/BFD measurements based on CSI-RS when CD-SSB is outside active BWP rlm-BM-BFD-CSI-RS-OutsideActiveBWP-r18 ENUMERATED {supported} OPTIONAL, -- R1 54-1: PRACH coverage enhancements prach-CoverageEnh-r18 ENUMERATED {supported} OPTIONAL, -- R1 54-1a: PRACH repetitions with less than N symbols gap prach-Repetition-r18 ENUMERATED {supported} OPTIONAL, -- R1 54-3: Dynamic waveform switching dynamicWaveformSwitch-r18 ENUMERATED {supported} OPTIONAL, -- R1 54-3a: PHR enhancement for dynamic waveform switching dynamicWaveformSwitchPHR-r18 ENUMERATED {supported} OPTIONAL, -- R1 54-3b: Dynamic waveform switching for intra-band UL CA dynamicWaveformSwitchIntraCA-r18 INTEGER (2..8) OPTIONAL, -- R1 55-3: Multiple PUSCHs scheduling by single DCI for non-consecutive slots in FR1 multiPUSCH-SingleDCI-NonConsSlots-r18 ENUMERATED {supported} OPTIONAL, -- R1 55-2d: single-symbol DL-PRS used in RTT-based Propagation delay compensation pdc-maxNumberPRS-ResourceProcessedPerSlot-r18 SEQUENCE { fr1-r18 SEQUENCE { scs-15kHz-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL, scs-30kHz-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL, scs-60kHz-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL }, fr2-r18 SEQUENCE { scs-60kHz-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL, scs-120kHz-r18 ENUMERATED {n1, n2, n4, n6, n8, n12, n16, n24, n32, n48, n64} OPTIONAL } } OPTIONAL, -- R1 57-2: Intra-slot TDM-ed unicast PDSCH and group-common PDSCH for multicast in RRC_INACTIVE state intraSlot-PDSCH-MulticastInactive-r18 BOOLEAN OPTIONAL, -- R1 57-1: Dynamic scheduling for multicast in RRC_INACTIVE state multicastInactive-r18 ENUMERATED {supported} OPTIONAL, thresholdBasedMulticastResume-r18 ENUMERATED {supported} OPTIONAL, -- R4 27-2: LowerMSD for inter-band NR CA and EN-DC lowerMSD-r18 SEQUENCE (SIZE (1..maxLowerMSD-r18)) OF LowerMSD-r18 OPTIONAL, lowerMSD-ENDC-r18 SEQUENCE (SIZE (1..maxLowerMSD-r18)) OF LowerMSD-r18 OPTIONAL, -- R4 28-1: Enhanced channel raster enhancedChannelRaster-r18 ENUMERATED {supported} OPTIONAL, -- R4 30-2: Fast beam sweeping for layer-1 measurement when the UE is in multi-Rx operation fastBeamSweepingMultiRx-r18 ENUMERATED {n2,n4,n6} OPTIONAL, -- R4 31-2 Beam sweeping factor reduction for FR2 unknown SCell activation beamSweepingFactorReduction-r18 SEQUENCE { reduceForCellDetection ENUMERATED {n1, n2, n4, n6}, reduceForSSB-L1-RSRP-Meas INTEGER (0..7) } OPTIONAL, -- R4 34-1: Support of NR FR2 HST with simultaneous DL reception with two different QCL TypeD RSs simultaneousReceptionTwoQCL-r18 ENUMERATED {supported} OPTIONAL, -- R4 34-2: Enhanced FR2 HST RRM requirements for intra-band CA and inter-frequency measurements in connected mode measEnhCAInterFreqFR2-r18 ENUMERATED {supported} OPTIONAL, -- R4 34-4: Support of enhanced MAC CE for TCI state switch indication for FR2 HST tci-StateSwitchInd-r18 ENUMERATED {supported} OPTIONAL, -- R4 35-2: the requirements defined for ATG UE with antenna array or omni-direction antenna requirements. antennaArrayType-r18 ENUMERATED {supported} OPTIONAL, locationBasedCondHandoverATG-r18 ENUMERATED {supported} OPTIONAL, -- R4 35-3: rated maximum output power value range from 23dBm to 40dBm with 1dB as granularity at maximum modulation order and full -- PRB configurations. maxOutputPowerATG-r18 INTEGER (1..18) OPTIONAL, -- R4 39-6: Fast processing of LTM candidate cell RRC configuration ltm-FastProcessingConfig-r18 SEQUENCE { maxNumberStoredConfigCells-r18 ENUMERATED {n2,n3,n4,n5,n6,n7,n8,n9,n10,n11,n12,n16}, maxNumberConfigs-r18 INTEGER (1..4) } OPTIONAL, -- R4 39-8: Measurement validation based on EMR measurement during connection setup/resume measValidationReportEMR-r18 ENUMERATED {supported} OPTIONAL, -- R4 39-9: Measurement validation based on reselection measurement during connection setup/resume measValidationReportReselectionMeasurements-r18 ENUMERATED {supported} OPTIONAL, eventA4BasedCondHandoverNES-r18 ENUMERATED {supported} OPTIONAL, nesBasedCondHandoverWithDCI-r18 ENUMERATED {supported} OPTIONAL, rach-LessHandoverCG-r18 ENUMERATED {supported} OPTIONAL, rach-LessHandoverDG-r18 ENUMERATED {supported} OPTIONAL, locationBasedCondHandoverEMC-r18 ENUMERATED {supported} OPTIONAL, mt-CG-SDT-r18 ENUMERATED {supported} OPTIONAL, posSRS-PreconfigureRRC-InactiveInitialUL-BWP-r18 ENUMERATED {supported} OPTIONAL, posSRS-PreconfigureRRC-InactiveOutsideInitialUL-BWP-r18 ENUMERATED {supported} OPTIONAL, cg-SDT-PeriodicityExt-r18 ENUMERATED {supported} OPTIONAL, -- R2: 2Rx XR UEs supportOf2RxXR-r18 ENUMERATED {supported} OPTIONAL, condHandoverWithCandSCG-change-r18 ENUMERATED {supported} OPTIONAL ]], [[ mac-ParametersPerBand-r18 MAC-ParametersPerBand-r18 OPTIONAL, channelBW-DL-NCR-r18 CHOICE { fr1-100mhz SEQUENCE { scs-15kHz ENUMERATED {supported} OPTIONAL, scs-30kHz ENUMERATED {supported} OPTIONAL, scs-60kHz ENUMERATED {supported} OPTIONAL }, fr2-200mhz SEQUENCE { scs-60kHz ENUMERATED {supported} OPTIONAL, scs-120kHz ENUMERATED {supported} OPTIONAL } } OPTIONAL, channelBW-UL-NCR-r18 CHOICE { fr1-100mhz SEQUENCE { scs-15kHz ENUMERATED {supported} OPTIONAL, scs-30kHz ENUMERATED {supported} OPTIONAL, scs-60kHz ENUMERATED {supported} OPTIONAL }, fr2-200mhz SEQUENCE { scs-60kHz ENUMERATED {supported} OPTIONAL, scs-120kHz ENUMERATED {supported} OPTIONAL } } OPTIONAL, ncr-PDSCH-64QAM-FR2-r18 ENUMERATED {supported} OPTIONAL, ltm-MCG-IntraFreq-r18 ENUMERATED {supported} OPTIONAL, ltm-SCG-IntraFreq-r18 ENUMERATED {supported} OPTIONAL ]], [[ -- R1 45-3a: MAC-CE activated joint LTM TCI states ltm-MAC-CE-JointTCI-r18 SEQUENCE { qcl-Resource-r18 ENUMERATED {ssb, trs, both}, maxNumberJointTCI-PerCell-r18 INTEGER (1..16), maxNumberJointTCI-AcrossCells-r18 INTEGER (1..32) } OPTIONAL, -- R1 45-4a: MAC-CE activated DL/UL LTM TCI states ltm-MAC-CE-SeparateTCI-r18 SEQUENCE { qcl-Resource-r18 ENUMERATED {ssb, trs, both}, maxNumberDL-TCI-PerCell-r18 INTEGER (1..8), maxNumberUL-TCI-PerCell-r18 INTEGER (1..8), maxNumberDL-TCI-AcrossCells-r18 INTEGER (1..32), maxNumberUL-TCI-AcrossCells-r18 INTEGER (1..32) } OPTIONAL ]] }